Skip to main content
Loading…
This section is included in your selections.

A. Form of presentation. The information hereinafter required as part of the preliminary plat submittal shall be shown graphically or by note on plans, or by letter, and may comprise several sheets showing various elements of required data. All mapped data for the same plat shall be drawn at the same standard engineering scale, said scale having not more than 100 feet to an inch. Scales shall be adjusted to produce an overall drawing measuring 24 inches by 36 inches.

B. Identification and descriptive data. The following identification and descriptive data shall be required as part of the preliminary plat submittal:

1. Proposed name of subdivision and its location by section, township, and range; reference by dimension and bearing to a section corner or quarter-section corner;

2. Name, address, and phone number of subdivider;

3. Name, address, and phone number of engineer, surveyor, landscape architect, or land planner preparing the plat;

4. Scale, north arrow, and date of preparation including dates of any subsequent revisions; and

5. Development option.

C. Existing conditions data. The following existing conditions shall be required as part of the preliminary plat submittal:

1. Topography by contours related to USGS survey datum, or other datum approved by the Planning and Development Department shown on the same map as the proposed subdivision layout. Contour interval shall be such as to adequately reflect the character and drainage of the land and extend from the boundary of the site a minimum of 50 feet or to the far side right-of-way or as determined by the Planning and Development Department staff;

2. Location of water wells, streams, canals, irrigation laterals, private ditches, washes, lakes, or other water-related features; direction of flow, location and extent of areas subject to flooding whether such inundation to be frequent, periodic, or occasional;

3. Location, widths, and names of all platted streets, railroads, utility rights-of-way of public record, public areas, buildings and other permanent structures to remain with their locations dimensioned to existing and proposed property lines, including water wells, and all municipal corporation lines within or adjacent to the tract;

4. Name, book, and page numbers of any recorded adjacent subdivisions having common boundary with the tract along with their existing lot lines;

5. By note, the existing zoning classification of the tract;

6. By note, the gross acreage of the tract which will include to the centerline of the abutting street(s); and

7. Boundaries of the tract to be subdivided shall be fully dimensioned.

D. Proposed conditions data. The following proposed conditions data shall be required as part of the preliminary plat submittal:

1. Street layout, including location, width, and proposed names of public streets, alleys, and connections to adjoining platted tract;

2. Typical lot dimensions (scaled); dimensions of all corner lots and lots of curvilinear sections of streets; each lot numbered individually; total number of lots;

3. Designation of all land to be dedicated or reserved for public use with the use indicated and those areas that will be deeded to a homeowners’ association; and

4. If plat includes land for which multi-family, commercial, or industrial use is proposed, such areas shall be clearly designated together with existing zoning classification and status of zoning change, if any.

E. Proposed utility methods.

1. Sewage disposal. It shall be the responsibility of the subdivider to furnish the County Health Department (delegate in the Department) such evidence as that delegate in the Department may require as to design and operation of sanitary sewage facilities proposed. A statement as to the type of facilities proposed shall appear on the preliminary plat.

2. Water supply. Evidence of adequate volume and quality satisfactory to the County Health Department (designee in the Department) and substantiated by letter from the Department.

3. Stormwater disposal. Preliminary calculations and layout of proposed system as required by the Grading and Drainage Ordinance in Chapter 32A and the City of Phoenix Stormwater Policies and Standards Manual and location of outlets, subject to approval of the Planning and Development Department. (Ord. No. G-3588, § 2; Ord. No. G-5590, § 1, 2011; Ord. No. G-5707, 2012)